ORIGINAL ROCKFORD FOSGATE PUNCH MARINE USA PM400X4 400W 4-CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PUNCH MARINE USA PM400X4 400W 4-CHANNEL AMPLIFIER

The PM400X4 is a 400 Watt 4-channel amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications.

The PM400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM - you got "The PUNCH." With its flexible design, the PM400X4 is an excellent amplifier choice for virtually any vehicle.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant - This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• TRANS•ana - Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
• Balanced Differential Inputs - Differential inputs eliminate noise picked up by signal cables.
• Element Ready™ - Amps - These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
• DTM - Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• DSM - DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
• MEHSA3 - MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
• NOMAD - NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
• Engineered In The USA - These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
• C.L.E.A.N. Set-Up - Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications:

• CEA-2006 Compliant: CEA-2006 Guidelines CEA-2006 Power Rating ; 50W x 4 @ 4Ω ; ≤1.0% THD+N
• Number of Channels: 4
• Total Power (Sum of Rated Power): 400 Watts
• Rated Power (RMS Continuous Power): 50 Watts x 4 @ 4-Ohm ; 100 Watts x 4 @ 2-Ohm ; 200 Watts x 2 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®): 82 Watts x 4 @ 4-Ohm ; 137 Watts x 4 @ 2-Ohm ; 266 Watts x 2 @ 4-Ohm Bridged
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity: 150 mV - 12 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 67% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
• Signal Input: Hi/Low level: 2 RCA pair
• Signal Output: -
• Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz Function depends upon LP/AP/HP switch position
• Crossover Controls: Front High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth ; Rear High-Pass/Low-Pass (HP/LP): 50Hz-250Hz @ 12dB/octave Butterworth ; All-Pass: Yes
• Remote Controls: -
• Visual Indicators: Power/Protect/Thermal LED
• Input Clip LED: 3 ; Output Clip LED ; 1,2,3
• Power Wire Gauge: 8 AWG to 4 AWG
• Power Input Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Speaker Output Connector: Captive C-Clamp
• Cooling: Convection
• Heatsink:
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 60 A
• Average Current Draw (13.8V Music): 30 A
• Max. Current Draw (13.8V Sinewave): 60 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.38 x 7.76 x 11.03 (in) ; 6.05 x 19.71 x 28.02 (cm)
• Shipping Weight10.8 Lbs. (4.89 Kg.)

Specifications:

• LED Color Legend:
• 1BLUE: <0.5% THD
• 2VIOLET: 1% THD
• 3RED: 10%+ THD
• Power Wire Gauge8 AWG to 4 AWG
• Power Input ConnectorCaptive C-Clamp
• Speaker Wire Gauge8 AWG to 18 AWG
• Speaker Output ConnectorCaptive C-Clamp
• CoolingConvection
• Heatsink
• Operating Voltage9 - 16 VDC
• Recommended Fuse
• (not included)60 A
• Average Current Draw (13.8V Music)30 A
• Max. Current Draw (13.8V Sinewave)60 A
• Suggested Alternator75 A
• Dimensional Diagram
• Dimensions (H x W x D)2.38 x 7.76 x 11.03 (in)
• 6.05 x 19.71 x 28.02 (cm)
• Shipping Weight10.8 Lbs. (4.89 Kg.)

Overview:

• High level input capable with Auto Turn-On circuit
• Features C.L.E.A.N. Set-up
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd