PROTON PERODUA TOYOTA MITSUBISHI CHEVROLET CHERY Plug and Play Key-less Engine Push Start System with Immobilizer
New product
Plug and Play for Various Car Below
Latest Key-less Engine Push Start System like new cars
Comes with Fully Push Start System, Just step on brake and press start, car will start.
No Longer Need Key anymore, just like those new cars with auto start function.
Easy Installation, Comes with Cover to cover original key hole.
No need to cut steering lock, comes with extra key to replace the original key hole
Use back your original car alarm system
Comes with Immobilizer, the sensor will sens your immobilizer so that you can step on the brake and push start
Fix the Push Button to an appropriate position (avoiding the inadvertent triggering position, with 30mm dial. Round hole provided)
Pass the wire through the partition board and press the starting switch against the partition board, attach the rubber ring and tighten the nut, so as to prevent if from dropping.
Connect the push button connected to terminal 15(ignition) behind the ignition switch, with another one connecting terminal 50 behind the ignition switch as well. (the power path form ignition to the starting motor)
The red wire should be connected to terminal 15. (The power path that passes through ignition)
PROTON, PERODUA, TOYOTA, MITSUBISHI, CHEVROLET, CHERY Plug and Play Key-less Engine Push Start System with Immobilizer
Plug and Play for Various Car Below
Latest Key-less Engine Push Start System like new cars
Comes with Fully Push Start System, Just step on brake and press start, car will start.
No Longer Need Key anymore, just like those new cars with auto start function.
Easy Installation, Comes with Cover to cover original key hole.
No need to cut steering lock, comes with extra key to replace the original key hole
Use back your original car alarm system
Comes with Immobilizer, the sensor will sens your immobilizer so that you can step on the brake and push start
Fix the Push Button to an appropriate position (avoiding the inadvertent triggering position, with 30mm dial. Round hole provided)
Pass the wire through the partition board and press the starting switch against the partition board, attach the rubber ring and tighten the nut, so as to prevent if from dropping.
Connect the push button connected to terminal 15(ignition) behind the ignition switch, with another one connecting terminal 50 behind the ignition switch as well. (the power path form ignition to the starting motor)
The red wire should be connected to terminal 15. (The power path that passes through ignition)
Asked by Sera on 08/20/2016Can this be install for Toyota sera ? Answer:
yes can fit.
Asked by Zac on 08/21/2016Hi. For this product is there any compatible with Ford Fiesta 2010? Thanks.Answer:
yes can fit but need to cut wire.
Asked by blyatman on 11/04/2016Can it be install to Manual cars?Answer:
yes can use for manual cars.
Asked by a guest on 11/18/2016hey there,
is this compatible with honda hrv?Answer:
don't have plug and play for honda hrv
Asked by a guest on 01/09/2017hi. can the alarm system to be fixed on perodua kelisa?Answer:
yes can fit.
Asked by Mubasher on 02/14/2017Is this device can install in Honda City 2008? If yes then which model and how much for installation.Answer:
yes u can install on honda city 2008 but we need to cut your wiring.
Asked by a guest on 03/12/2017Can it fit on iswara? Answer:
yes can fit iswara.
Asked by Rais on 06/20/2017Hi, can this be install in Proton Neo R3? Will it effect the alarm system? Compare it to the Scuta system, will it comes with separate key? Plus, the blue keychain in the picture, what is it for? Last but not least, total coast of this product plus labour around how much? Thank you.Answer:
yes it can fit. Installation fees RM150. Scuta is full set alarm.
Asked by nick lu on 07/12/2017Myvi 2012 1.5SE的可以用吗?Answer:
yes can fit, just plug and play
Asked by a guest on 07/17/2017Total cost include installation?personaaAnswer:
installation fees RM150
Asked by Tan on 08/11/2017Can it fit to Hyundai Tucson 2016? will it void the warranty?Answer:
sorry this model can't fit.
Asked by zaman on 08/20/2017can this be install for naza citra gs?Answer:
no it can't fit.
Asked by Asrolafandi on 01/14/2018LocationAnswer:
I am in cheras taman maluri.
Shop name Maxaudio.com.my
Address: 74, Jalan jejaka, taman maluri, Cheras, 55100, Kuala Lumpur.
Beside Aeon Taman Maluri (Jaya Jusco), same roll with pizza hut, JJ chair, facing main road.
Gps coordinate: N3 7' 35.2" E101 43' 49.1"
Use Waze Apps: http://waze.to/hw283fcjst
Asked by Joseph on 03/18/2018Does the device just plug and play for Saga balm without cutting wire??Answer:
plug and play for saga blm
Asked by KAMARUZZAMAN on 07/10/2018Can this item be installed to Proton Ertiga?Answer:
don't have plug and play socket, suggest u get scuta alarm.
Asked by teh on 10/12/2018it can be plug and play at new persona 2016 standard?Answer:
sorry can't fit new persona.
Asked by juan pablo villalobos guerra on 03/12/2019can this be install for toyota 4runner limited 2015?Answer:
yes
Asked by a guest on 09/02/2019Can Plug & Play Proton Saga VVT?Answer:
yes
Summary
Product Name:PROTON PERODUA TOYOTA MITSUBISHI CHEVROLET CHERY Plug and Play Key-less Engine Push Start System with Immobilizer
ByEASY CAR
Price:
USD $
Product Width: 0.00 cm
Product Height: 0.00 cm
Product Depth: 0.00 cm
Product Weight: 2.00 kg
Description:
Plug and Play for Various Car Below
Latest Key-less Engine Push Start System like new cars
Comes with Fully Push Start System, Just step on brake and press start, car will start.
No Longer Need Key anymore, just like those new cars with auto start function.
Easy Installation, Comes with Cover to cover original key hole.
No need to cut steering lock, comes with extra key to replace the original key hole
Use back your original car alarm system
Comes with Immobilizer, the sensor will sens your immobilizer so that you can step on the brake and push start
Fix the Push Button to an appropriate position (avoiding the inadvertent triggering position, with 30mm dial. Round hole provided)
Pass the wire through the partition board and press the starting switch against the partition board, attach the rubber ring and tighten the nut, so as to prevent if from dropping.
Connect the push button connected to terminal 15(ignition) behind the ignition switch, with another one connecting terminal 50 behind the ignition switch as well. (the power path form ignition to the starting motor)
The red wire should be connected to terminal 15. (The power path that passes through ignition)
1 Year Warranty
Path:
Home>Guard My Ride (ALARM) > Alarm System > PROTON PERODUA TOYOTA MITSUBISHI CHEVROLET CHERY Plug and Play Key-less Engine Push Start System with Immobilizer