JBL GT5-10 10" 1100W 4-ohm Single Voice Coil SVC Car Audio Subwoofer System

JBL GT5-10 10" 1100W 4-ohm Single Voice Coil SVC Car Audio Subwoofer System

For anyone who likes to crank it up in the car, the JBL high-output GT5-10 subwoofer is the real deal. The JBL GT5-10 subwoofer features single 4-ohm voice coils and a vented motor structure, and offers 1100 watts of peak power handling. The GT5-10D also features JBL’s newest design, combining classic elements with modern ones.

The GT5-10 follows the design of the more-expensive JBL subwoofers, combining classic elements with modern ones. The GT5-10 handles 275W/1100W (RMS/Peak) power and offers nearly 20 percent higher Xmax than many competitors. With its fully vented motor structure and rubber-coated tinsel leads, the GT5-10 is able to withstand even the most intense bass assault. Unlike competing entry-level subwoofers, the GT5-10 is based on a solid motor structure featuring two large magnets covered by the classic JBL rubber ring.

Outstanding Audio Output, Low Distortion

• With 250 watts RMS and 1100 watts of peak power handling, the GT5-10 changes the experience of listening to your favorite music in your car. And a progressive spider gives better control for lower distortion at excursion limits.

Exceptional Venting for Increased Power Handling

• Woofer motor structures heat up during use, causing distortion, or power compression that reduces music's dynamic range, robbing the sound of realism. JBL uses vented motor structures and polepieces that get rid of more heat to deliver more serious bang.

Enclosure Up to JBL Professional Standards

• It's built to the same exacting standards as JBL professional audio boxes with 3/4" medium-density fiberboard construction, and high-quality binding-post terminals. Wide-bandwidth design provides more output between 30Hz and 50Hz. You get all the bass you've paid for.

Accurate Frequency Response

• With a frequency response of 30Hz – 500Hz, the GT5-10 reproduces deep, teeth-rattling bass tones without distortion.

Features

• Series: GT5
• 10" Single 4 ohm GT Series Subwoofer
• Big bass with Polypropylene woofer cone
• Outstanding audio output, low distortion
• Impedance single 4 ohms voice coil
• Power Handling: Peak: 1100 watts / RMS: 250 watts
• Exceptional venting for increased power handling
• Enclosure up to JBL Professional standards
• Accurate frequency response
• High-roll rubber surround
• Progressive spider
• Rubber coated tinsel leads
• Dual stacked oversized magnet

Audio Specifications:

• Peak Power: 1000W
• Frequency Response: 30Hz – 500Hz
• Sensitivity: (2.83V/1m) 91dB
• Nominal Impedance: 4 ohms
• Power Handling (RMS): 250W
• Power Handling (Peak): 1000W

Dimensions:

• Mounting Depth (mm): 151
• External Diameter (in): 10-3/8
• Mounting Depth (in): 5-5/16
• Mounting Cutout Diameter (mm): 233
• External Diameter (mm): 264
• Mounting Cutout Diameter (in): 9-3/16

Woofer Specifications:

• Driver Radiating Area: (Sd – in2/cm2) 56.3/363
• Total Q: (Qts) 0.49
• Compliance Volume: (Vas – ft3 / l) 1.11/31.5
• Electrical Q: (Qes) 0.54
• Suspension Compliance: (Cms – ?m/N) 167.3
• Motor Force Factor: (Bl – Tm) 14.76
• Maximum Excursion: (Xmax –in/mm) .56/14.2
• Voice Coil DC Resistance: (Revc – ohms) 4
• Mechanical Q: (Qms) 6.48
• Free-Air Resonance: (Fs – Hz) 30
• Magnetic Gap Height: (Hag – in/mm) 0.315/8
• Voice Inductance: @ 1kHz (Levc – mH) 2.69
• Voice Coil Height: (Hvc – in/mm) 1.43/36.4

What's in the box:

• 1x GT5-10 10” Single Voice Coil 4-Ohm Subwoofer
• 1x Owner's Manual