TOYOTA VIOS 2002 - 2006 EAGLE EYES Red Smoke Lens LED Tail Lamp [TL-062-1]

TOYOTA VIOS 2002 - 2006 EAGLE EYES Red Smoke Lens LED Tail Lamp [TL-062-1]

• Product comes in 1 Pair
• 2 Years Warranty (Spare Parts Replacement Available for Warranty)
• Products Comes with 100% Original EAGLE EYE Warranty Card with Serial Number that can be claim at any EAGLE EYE Distributor/ Outlet
• 100% Made in Taiwan

• JPJ Approve E9 E-Mark with safety quality assured
• Complete Plug & Play socket harness with no wire cut to protect manufacturer warranty
• Eagle Eyes got Manufacturing of Automotive Lighting Experience which more than 32 Years
• International Automotive Lighting Safety Standard
• Quality Certification: DOT, Germany RW-TUV, ISO 9001:2000, ISO 17025/ ISOTS 16949, CAPA of American Society Insurance, EU Specifications (E-Mark), American SAE (Lighting Standard)

Product Material

• Lens: PC (Polycarbonate) (Heat Resistant 110C - 120C) Can withstand HID Bulbs
• Back Housing Part: 20PP (Polypropylene) (Heat resistant 85C - 95C)
• Beam Reflector: BMC (Bulk Molding Compounds) (Heat Resistant 260C)
• Day Running Light: LED (Light Emitting Diode) Lighting around 7000K

About

• One Stop Automotive Lighting Service Center
• International Automotive Lighting Brand
• 35 years experience on automotive lighting part manufacturing
• Products certified with international automotive lighting safety standard
• ECE, CAPA, SAE & ISO

Achievements

• Golden Bull Award at 2012
• Smart Consumer Branding at 2014
• Sin Chew Excellent Business Award at 2015

Aproved

• With E-Mark Recognition (Economic Commision of Europe)
• Certifications by JPJ (Road Transport Department of Malaysia)
• Legal to be use on the road

Do you face this problem before?

Driving at night without street lights are hazardous, At Eagle Eyes we make sure every drivers are equipped with headlight that helps them have better visibility of the road.

Every Eagle Eyes Headlights are dazzle-free, meaning it won't give other road users blind glares.

Normal/ Original Reflector headlights have limited light output and narrowed light angle, whence Eagle Eyes Headlights are more immense in terms of width angle and far-ranging on its light output distance.

While Reflector headlights will not illuminate too far ahead of the vehicle, Eagle Eyes Headlight will be helpful for drivers to see upcoming obstacles/ car ahead braking/ indication of corners or other hazards ahead.

Deadly accidents (Occur at Night)

• Deadly accident happen mostly at night
• Improve the headlight technology & it will enhance safety driving at night
• Currently Malaysia is at the the top ranking of the Asian-Highest Accident Fatalities

Head Light Structure

• Projector headlight provide the more clear Visibility
• Day Running Light (DRL) functional for attract to the road user enhance the crash accident happen
• Using the Reflector Optics during heavy rain is more better for our Visibility

Advantage Projector Head Light

• Advantage for the headlight Projector is Cut Off Line which are the light output to improve road visibility & avoid blind oncoming road user eyes

Comparison Reflector vs Eagle Eyes Head Light

• Eagle eyes headlight projector 3 times much longer compared vs visibility reflector headlight
• Eagle eyes more visibility to 45 feet wide compared reflector lamp
• Had been tested in the for light beam during heavy rain

Advantage LED Tail Light

• Eagle Eyes taillight's driving light are equipped with LED / LED Light bars giving it more attention to other drivers on the rear side compared to the bulbs.
• Every Taillights are designed stylishly and achieved international safetyness standard, making the vehicle look more magnificient and letting drivers drive safely at the same time.

Quality assurance when purchasing Eagle Eyes Lighting

• International Certificate & JPJ Approval
• Approved by JPJ (Road Transport Department of Malaysia)
• Achieved international quality with certifications from ECE(Europe), SAE (US), CAPA (US) & ISO 9001

Factory facilities

• Eagle Eyes production undergoes a strict manufacturing
• Which look beyond the conversion of its materials and processes which lead to quality finished products
• Eagle Eyes factory in Taiwan uses the latest technology and proffesional equipment to improve the quality and efficiency of all its products

Photometric machine

• The photometric machine that EAGLE EYES used is imported from U.S.A.
• This is the same machine that widely used by well-known European car automotive maker companies such as Hella, AL Automotive and Bosch to perform photometric test
• It has achieved International Standard Optical test to check the compliance of the luminance (sd or lux), saturation and adjust function of each lamp
• Using Geometrical measurement. A measuring project is used to check the filament geometry with regard to the statutory standards in accordance with Euro Standard
• The filament has to have the size and position within the bulb specified in the standard
• This is the only way to achieve optimum light power in the headlights and prevents oncoming drivers from being blinded

Environmental Test

All of Eagle Eyes products undergo environmental tests. The engineers at Eagle Eyes Quality Assurance department have specified a clear requirement profile for every lights produced.

Headlight's projector, for example, are scrutinized by our engineers for their light distribution properties, using state-of-the-art light measuring equipment.

Paint adhesion tests in accordance with ECE automotive regulations (E-Mark of the Economic Commission for Europe), vibration and shock tests in line with ECE requirements, geometry measurements,light flux and power measurements as well as service life tests guarantee that all our customers receive it in perfect quality.

These and further tests are carried out by Eagle Eyes quality assurance engineers.

All our Automotive Lights fulfill this performance spectrum:

1. Five hours of off-road driving are simulated by uniform spraying with mud.

2. For one hour, the headlamps are subjected to temperatures between -4O°F and +176°F. Shock treatment between the arctic and tropics.

3. For one hour, the headlamps are sprayed with water at a pressure of 58 psi. This simulates driving in torrential rain.

4. One hour of vibration testing at 750 oscillations per minute. This simulates the toughest conditions resulting from potholes, cobblestone pavement, and other off-road tortures.

5. Heat Test – Part 1 – 24-hour Test
The headlamp remains switched on constantly for 24 hours – alternating between low beam and high beam.

6. Heat Test – Part 2
The headlamp is subsequently exposed to a temperature of 122ºF for one hour.

7. Vibration Test
This test simulates the behavior of the headlamp during driving.

8. Splash Test
How does the headlamp react when it is exposed to rain, splashes of water and the car wash?

9. Fogging Test
The headlamp is left switched off and exposed to water stem (68ºF, 100% air humidity).

10.Evaluation of Lighting Technology
Technical lighting investigations are carried out at Eagle Eyes. The technical specifications must meet Eagle Eyes standards before considering production.

11. Service life test
Sophisticated tests are used to prove the high reliability of the Hella bulbs over a long period.

12. Vibration and shock test
Vibration resistance of the bulbs and the filament in particular is tested on an electrodynamic vibration table.

13. Geometrical measurement
A measuring project is used to check the filament geometry with regard to the statutory standards in accordance with IEC 60810. The filament has to have the size and position within the bulb specified in the standard. This is the only way to achieve optimum light power in the headlights and prevents oncoming drivers from being blinded.

14. Light flux measurement
The Ulbricht sphere and goniometer are used to determine the light fluxes and luminous intensities of the bulbs in the headlights. This guarantees optimum light output of the bulbs.

15.Paint adhesion test
The adhesion of paint on colored glass bulbs - such as the PY21W for example - is tested in a climate chamber at different temperatures and air humidities. Optimum adhesion of glass bulb paint guarantees the prescribed amber indicator light over the complete service life period.

Reliable Product

• Our product socket designed with OEM standard, plug and play, never affect original car warranty
• Canbus system to prevent car error signal problem, so you no need worry to spend extra money and time to reset the car system
• We double check the lighting function before send to the customer to prevent defective issue happening

• Moisture is not a problem, it is normal if happen within 14 days (Depends on area)
• Temperature difference between internal lens and internal lamp, when the cold air go inside the light, temperature make it become moisture
• It will automatically disappear within 14 days (Depends on the area)