No products
We ship to United States
Rockford Fosgate®. It's a full sentence. It means POWER! It means ATTITUDE! Since 1973, when founder Jim Fosgate put his name on the first real piece of high performance audio equipment built for the car, nothing has been the same.
Rockford Fosgate®. It's a full sentence. It means POWER! It means ATTITUDE! Since 1973, when founder Jim Fosgate put his name on the first real piece of high performance audio equipment built for the car, nothing has been the same.
The Prime R250X4 is a 250 watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls.
The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.
The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.
The PRIME R250X1 is a mono amplifier featuring a compact chassis capable of producing 250 Watts of pure Rockford Fosgate power into 2-Ohms. The frequency response of the R250X1 allows it to be used exclusively with subwoofers.
The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
The R14X2 is a 4” 2-way full-range speaker rated at 30 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.
The R152 is a 5.25” 2-way full-range speaker rated at 35 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.
The R165X3 is a 6.50” 3-way full-range speaker rated at 45 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.
The R1675X2 is a 6.75” 2-way full-range speaker rated at 45 watts RMS for a new generation of factory replacement speakers. Kit includes two speakers with grilles, integrated high-pass crossovers and mounting hardware.
The R169X3 is a 6”x9” 3-way full-range speaker rated at 65 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware.
The R169X2 is a 6”x9” 2-way full-range speaker rated at 65 watts RMS for a new generation of factory replacement speakers. Kit includes integrated high-pass crossovers and mounting hardware.
Rockford Fosgate Prime 10” subwoofers provide high performance bass at an unbelievable value. The R1S410 features a Single Voice Coil design, 150 Watt RMS power handling, and work great in sealed enclosures.
The R1S4-12 features a 4-Ohm Single Voice Coil design, 200 Watt RMS power handling, and is optimized for both sealed and vented enclosures.
Car Audio Fanatics wanting big bass can rely on the Prime R2D4-10 subwoofer. This 10” subwoofer handles 250 Watt RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.
Car Audio Fanatics wanting big bass can rely on the Prime R2D4-12 subwoofer. This 12” subwoofer handles 250 Watt RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.
When you have no space for bass, our Prime R2SD4-10 shallow subwoofer will satisfy your need. This 10” subwoofer handles 200 Watts RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.
When you have no space for bass, our Prime R2SD4-12 shallow subwoofer will satisfy your need. This 12” subwoofer handles 200 Watts RMS and the 4-Ohm Dual Voice Coil design lets you to wire them in various configurations.
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.
The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The Punch P400X4 is a 4-channel amplifier producing 100 Watts into all four channels at 2-Ohm. The P400X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.
The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The Punch P400X1 is a mono amplifier capable of producing 400 Watts into a 2-Ohm load and is designed for medium to high-powered subwoofer applications. You can also use the P400X1 for multi-speaker center channel applications.
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
The R2S-1X10 is a single 10” shallow enclosure with 200 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.
The R2S-1X12 is a single 12” shallow enclosure with 250 Watts RMS power handling wired to a 2-Ohm load. The enclosure is constructed with 5/8” MDF, covered in high density carpet, and features quick release compression terminals.
The Prime R165-S is a 6.5" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers and mounting hardware.
The Prime R1675-S is a 6.75" 2-way component system rated at 40 watts RMS for a new generation of factory replacement speakers. Kit includes two woofers with grilles, two tweeters with integrated crossovers and mounting hardware.
The R1T-S is a 1/2” mylar balanced dome tweeter kit rated at 40 watts RMS offering accurate reproduction of high frequencies. Kit includes integrated high-pass crossovers and flush, surface and angle configurations.
The Punch PBR300X1 is a 300 Watt mono amplifier designed for compact subwoofer systems. This efficient amp packs a Punch in motorcycles, ATVs and hybrid-electric vehicles without sucking a lot of juice from your electrical system.
The Punch PBR300X4 is a 300 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in motorcycles, ATVs and hybrid-electric vehicles without sucking a lot of juice from your electrical system.
The new 2011 Rockford Fosgate P500X4D 4-channel amplifier is the perfect solution when looking to amplify some speakers or even some entry level subwoofers at the bridged impedance. Low-level and high-level inputs will allow the installation of this amplifier into any car system, whether you have a factory installed system or aftermarket system, making it...
The Punch P1000X1D is an efficient mono amplifier producing 1,000 Watts into a 1-Ohm or 2-Ohm load without excessive pull on the electrical system. The frequency response of the P1000X1D is optimized for mid-bass and subwoofers.
