ORIGINAL ROCKFORD FOSGATE PUNCH USA P600X4 600W RMS 4 CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PUNCH USA P600X4 600W RMS 4 CHANNEL AMPLIFIER

The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.

The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant - This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• TRANS-ana - Trans-ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
• Balanced Differential Inputs - Differential inputs eliminate noise picked up by signal cables.
• DTM - Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• DSM - DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
• MEHSA3 - MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
• NOMAD - NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
• Engineered In The USA - These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
• C.L.E.A.N. Set-Up - Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications:

• CEA-2006 Compliant: CEA-2006 Guidelines ; CEA-2006 Power Rating 75W x 4 @ 4Ω ≤1.0% THD+N
• Number of Channels: 4
• Total Power (Sum of Rated Power): 600 Watts
• Rated Power (RMS Continuous Power): 75 Watts x 4 @ 4-Ohm ; 150 Watts x 4 @ 2-Ohm ; 300 Watts x 2 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®): 129 Watts x 4 @ 4-Ohms 0° Res ; 211 Watts x 4 @ 2-Ohms 0° Res
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity: 150 mV - 12 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 68% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
• Signal Input: Hi/Low level: 2 RCA pair
• Signal Output: Low level: 1 RCA pair
• Tone Controls: Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz ; Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz ; Function depends upon LP/AP/HP switch position
• Crossover Controls: Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth ; Front/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth ; All-Pass: Yes
• Remote Controls: Optional Punch Level Control (PLC2) Ready
• Visual Indicators: Power/Protect/Thermal LED ; Input Clip LED3 ; Output Clip LED1,2,3 ; LED Color Legend: 1BLUE: <0.5% THD ; 2VIOLET: 1% THD ; 3RED: 10%+ THD
• Power Wire Gauge: 4 AWG
• Power Input Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Speaker Output Connector: Captive C-Clamp
• Cooling: Convection
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 100 A
• Average Current Draw (13.8V Music): 45 A
• Max. Current Draw (13.8V Sinewave): 90 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.38 x 7.76 x 13.28 (in) ; 6.05 x 19.71 x 33.73 (cm)
• Shipping Weight: 12.8 Lbs. (5.80 Kg.)

Overview:

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd