No products
We ship to United States
8 People are currently looking at this page
Catalog
We have All Types of 2 Channel, 4 Channel, 5 Channel and Monoblock Amplifier. Cheap Price✓ FREE Delivery Available✓ Worldwide Delivery✓ 1 - 3 Years Warranty✓
Recommended for Coaxial Speaker, Component Speaker & Subwoofer Max Power: 1000W PMPO Nominal Power: 50W RMS x 2 Stack-able installation compact size and tiny footprint double side PCB and SMD components full mosfet design LPF and subsonic crossover adjustable bass boost frequency and level Infinitely variable phase control for mono model active x-over...
Brand: JBL Model: GT5-A402 Applicable for Speaker or Subwoofer RMS Power @ 4 ohms: 40 watts x 2 chan RMS Power @ 2 ohms: 60 watts x 2 chan Bridged RMS Power: 120 watts x 1 chan Peak Power Output: 120 watts x 2 chan Amplifier: Class AB Number of Channels: 2 Total Peak Power Output: 240 watts Total RMS Power Output: 120 watts Maximum Input Gauge Size: 8...
100% Original Product Brand: MOHAWK Model: MOD-500.1 Series: Diamond Number of channels: 1 Amplifier class: AB Power output in 4 ohms :250W Power output in 2 ohms: 500W Power output in 1 ohm: - S/N ratio, A-weighted: >95dB THD & Noise: < 0.10% Input sensitivity: 0.2V - 6V Bass boost: 0-18dB @45Hz Low pass filter: 40Hz - 300Hz Remote bass...
100% Original Product Brand: MOHAWK Model: MOD-300.4 Series: Diamond Number of channels: 4 Amplifier class: AB Power output in 4 ohms: 70W x 4 Power output in 2 ohms: 100W x 4 Mono bridge in 4 ohms: 200W x 2 S/N ratio, A-weighted: >90dB THD & Noise: < 0.05% Input sensitivity: 0.2V - 6V Baas boost: 0-18dB @45Hz High pass filter: 10Hz - 1.2kHz Low...
Brand: PUNCH Model: PH-M350 Series: V-Series Power Output: 3500 Watt x1 RMS Power @ 2 Ohms: 500 Watt x1 Fuse Rating: 30A x2 Comes with Bass Controller Low Pass Filter 50Hz 250Hz: Variable High Pass Filter 50Hz 1KHz: No Variable Frequency Response (-dB): 10Hz-400Hz (ÍÁ2dB) Signalto Noiseratio (.A.WTD): >90dB Input Sensitivity: 400mv-6V Input Impedance:...
Brand: PUNCH Model: PH-404 Series: V-Series 4 Channel Amplifier Max Output Power: 3200 WATTS Highly Recommend for Speaker Only Comes with Surround System High Efficiency Mosfet Power Supply. Variable Low Pass & High Pass Crossover. Tri-Mode output configuations. Thermal/ Short Circuit/ Overloading Protection. Stereo @ 4 Ohm : 4 X 40 Watts RMS Stereo @...
Brand: PROKICK Series: Classic Model: PK502 Recommended for Coaxial Speaker, Component Speaker & Subwoofer Max Power: 1000W PMPO Nominal Power: 50W RMS x 2 @ 4Ohm Nominal Power: 70W RMS x 2 @ 2Ohm Stack-able installation compact size and tiny footprint double side PCB and SMD components full mosfet design LPF and subsonic crossover adjustable bass...
Fill your vehicle with powerful sound, even when installation space for the compact JBL Club one-channel amplifier is limited. Variable electronic crossovers and high- and low-level inputs are ready for more types of installations than others in its class. The JBL Club one-channel amplifier is compatible with existing vehicle ADAS alert systems and...
Powerful and Compact 280-Watt Full Range Amplifier The GX-A602 brings studio-quality audio to your car. With total peak power of 280 watts packaged inside a tiny footprint of just 2-1/16" (52mm) high, 8-1/8" (206mm) wide and 7 13/16" (198mm) deep, the GX-A602 is compact but mighty. Supports 2-channel full range, high pass operation or bridged mono for a...
The GX-A604 brings studio-quality audio to your car. The GX-A602 is compact but mighty. Supports 4-channel full range, high pass operation or bridged mono for a subwoofer. Features include a cast-aluminum heat sink, built-in electronic crossover networks and a switchable bass boost. With almost seven decades of experience in bringing live music to life,...
A 415-watt mono subwoofer amplifier with on-board variable electronic crossover, the GX-A3001 features a compact footprint of just 2-1/16" (52mm) high, 9-1/8" (206mm) wide and 11 7/16" (291mm) deep. This tiny powerhouse includes a cast-aluminum heat sink, built-in electronic crossover networks, and enough power to drive your woofers to distraction.
GTR Stadium AmplifiersAmplifiers with a small footprint and big impact. GTR mono and full-range, multi-channel amplifiers deliver the efficiency and power you expect from Class D amps—and the performance you expect from JBL. Each model in the lineup will accept both high-level or low-level inputs, allowing the JBL Stadium amplifiers to be added to...
The Prime R250X4 is a 250 watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls.
The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.
The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.
The PRIME R250X1 is a mono amplifier featuring a compact chassis capable of producing 250 Watts of pure Rockford Fosgate power into 2-Ohms. The frequency response of the R250X1 allows it to be used exclusively with subwoofers.
The Prime R500X1D is a 500 watt mono amplifier using efficient Class-D circuit topology. This amplifier is capable of running a 2-Ohm load and includes on-board Punch Bass and remote Punch Level Control.
The PRIME R1200-1D is an ultra-efficient mono amplifier for cars and trucks that can produce 1,200 Watts into a 1-Ohm load without taxing the electrical system. The frequency response of the R1200-1D is optimized exclusively for use with subwoofers.
The Punch P300X2 is a 2-channel stereo amplifier capable of producing 150 Watts into each channel at 2-Ohms. The P300X2 amplifier is great with full-range or component systems and can be bridged for use with smaller subwoofers.
The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.
The Punch P500X2 is a 2-channel stereo amplifier capable of producing 250 Watts into each channel at 2-Ohms. The P500X2 amplifier is great with full-range or component systems or can be bridged for use with several subwoofers.
The Punch P600X4 is a 4-channel amplifier producing 150 Watts into all four channels at 2-Ohm. The P600X4 is perfect for a 4-way full-range system or a 3-way system having a front stage with subwoofers on the rear channels.
The Punch P1000X5 is an ultra-efficient 5-channel amplifier capable of running your entire system without excessive drain on your charging system. The P1000X5 is perfect for running a front/rear system and a dedicated subwoofer.
The Punch P300X1 is a mono amplifier capable of producing 300 Watts into a 2-Ohm load. The P300X1 full-range frequency response makes it perfect for a subwoofer system or for powering a dedicated center channel speaker.
The Punch P400X1 is a mono amplifier capable of producing 400 Watts into a 2-Ohm load and is designed for medium to high-powered subwoofer applications. You can also use the P400X1 for multi-speaker center channel applications.
The Punch P500X1bd is a mono amplifier capable of 500 Watts into a 1-Ohm load. The Class-BD technology produces bass more efficiently over traditional amps, and its frequency response allows it to be optimized for subwoofers.
The Punch PBR300X1 is a 300 Watt mono amplifier designed for compact subwoofer systems. This efficient amp packs a Punch in motorcycles, ATVs and hybrid-electric vehicles without sucking a lot of juice from your electrical system.
The Punch PBR300X4 is a 300 Watt full-range amp designed for compact systems. This efficient 4-channel amp packs a Punch in motorcycles, ATVs and hybrid-electric vehicles without sucking a lot of juice from your electrical system.
JBL believes sound quality should never be compromised. And Series III subwoofers make sure you don’t have to compromise flexibility, either. That’s because the high-performance, step-up subwoofers feature SSI™ (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—for your system. Special...
JBL believes sound quality should never be compromised. And Series III subwoofers make sure you don’t have to compromise flexibility, either. That’s because the high-performance, step-up subwoofers feature SSI™ (Selectable Smart Impedance), an exclusive impedance switch that lets you select the optimum impedance—2 or 4 ohms—for your system. Special...
Authentic JBL Power and Performance New high-performance JBL Club amplifiers deliver world-class JBL power from a compact chassis built to fit in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high and low-level inputs...
Authentic JBL Power and Performance New high-performance JBL Club amplifiers deliver world-class JBL power from a compact chassis built to fit in more vehicles, even when space is tight. Available in 4-channel, 5-channel, and mono models, Club amps feature variable crossovers and bass boost for precise control and tuning, plus high and low-level inputs...
The new 2011 Rockford Fosgate P500X4D 4-channel amplifier is the perfect solution when looking to amplify some speakers or even some entry level subwoofers at the bridged impedance. Low-level and high-level inputs will allow the installation of this amplifier into any car system, whether you have a factory installed system or aftermarket system, making it...
