ORIGINAL ROCKFORD FOSGATE PRIME USA R250X4 250W RMS 4 CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PRIME USA R250X4 250W RMS 4 CHANNEL AMPLIFIER

The Prime R250X4 is a 250 watt 4-channel amplifier capable of running 2-Ohms stereo on all channels and 4-Ohms bridged/mono on the rear channels. Includes on-board Punch Bass and front/rear crossover controls.

The Prime R250X4 is a 4-Channel amplifier perfect for any Car Audio Fanatic getting into mobile audio wanting a single amplifier to run a complete audio system. This amplifier features selectable Punch Bass to tune low frequencies, variable crossovers to either protect your high frequency speakers or feeding only bass to your subwoofers, and Pass-Thru jacks for daisy-chaining another amplifier.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant- This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• Class A/B - An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Specifications:

• CEA-2006 Compliant: CEA-2006 Power Rating ; 40W x 4 @ 4Ω ≤1.0% THD+N
• Number of Channels: 4
• Total Power (Sum of Rated Power): 250 Watts RMS
• Rated Power (RMS Continuous Power): 40 Watts x 4 @ 4-Ohms ; 60 Watts x 4 @ 2-Ohms ; 125 Watts x 2 @ 4-Ohms Bridged
• Dynamic Power (PVC/PowerCube®): 54 Watts x 4 @ 4-Ohms 0° Res ; 82 Watts x 4 @ 2-Ohms 0° Res
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/-1dB
• Input Sensitivity: 150 mV to 4 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 64% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
• Signal Input: Low Level: 2 RCA Pair ; High Level: 2 x 4-pin MOLEX
• Signal Output: -
• Tone Controls: Punch Bass: 0dB/+6dB/+12dB @ 45Hz
• Crossover Controls: Front Channels (High-Pass/Low-Pass (HP/LP) : 50Hz-250Hz @ 12dB/octave Butterworth) ; Rear Channels (High-Pass/Low-Pass (HP/LP) : 50Hz-250Hz @ 12dB/octave Butterworth)
• Remote Controls: -
• Visual Indicators: Power/Protect LED
• Power Wire Gauge: 4 AWG
• Power Input Connector: Barrier Strip
• Speaker Wire Gauge: 8 AWG
• Speaker Output Connector: Barrier Strip
• Cooling: Convection
• Heatsink: -
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 50 A
• Average Current Draw (13.8V Music): 20 A
• Max. Current Draw (13.8V Sinewave): 40 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D)1.98 x 6.77 x 11.22 (in) ; 5 x 17.2 x 28.5 (cm)
• Shipping Weight7 Lbs. (3.17 Kg.)

Overview:

• 12dB/octave Butterworth crossover
• 0/6/12 dB On Board Punch EQ Control
• 2/4 channel input switch
• High Level Input (4-pin)
• Separate Front and Rear Gain Control
• Real time output and power supply thermal sensing
• Cast aluminum heatsink
• 4 Gauge power/ground connectors
• MOSFET power supply
• Over current protection
• Short circuit protection
• Muted turn on
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd