ORIGINAL ROCKFORD FOSGATE PUNCH USA P400X2 400W RMS 2 CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PUNCH USA P400X2 400W RMS 2 CHANNEL AMPLIFIER

The Punch P400X2 is a 2-channel stereo amplifier capable of producing 200 Watts into each channel at 2-Ohms. The P400X2 amplifier is great with full-range or component systems or can be bridged for use with 2 or more subwoofers.

Whether you're looking to drive high frequency component speakers or low frequency subwoofers, the P400X2 has the power and flexibility you need to put some serious PUNCH in your vehicle. The power available from such a small amp means it's a great match for a 2-ohm DVC subwoofer or pair of 8-ohm SVC subwoofers.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant - This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• TRANS-ana - Trans-ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
• Balanced Differential Inputs - Differential inputs eliminate noise picked up by signal cables.
• DTM - Dynamic Thermal Management evenly distributes excess heat across entire amplifier heatsink.
• DSM - DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
• MEHSA3 - MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
• NOMAD - NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
• Engineered In The USA - These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
• C.L.E.A.N. Set-Up - Patented circuit with in/out clip LEDs to help match a source to amp and optimize output.

Specifications:

• CEA-2006 Compliant: CEA-2006 Guidelines ; CEA-2006 Power Rating ; 125W x 2 @ 4Ω ≤1.0% THD+N
• Number of Channels: 2
• Total Power (Sum of Rated Power): 400 Watts
• Rated Power (RMS Continuous Power): 125 Watts x 2 @ 4-Ohm ; 200 Watts x 2 @ 2-Ohm ; 400 Watts x 1 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®): 149 Watts x 2 @ 4-Ohms 0° Res ; 256 Watts x 2 @ 2-Ohms 0° Res
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/- 1.0dB
• Input Sensitivity: 150 mV - 12 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 72% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
• Signal Input: Hi/Low level: 1 RCA pair
• Signal Output: Low level: 1 RCA pair
• Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or Punch EQ2 Treble: 0dB to +12dB @ 12.5kHz ; Function depends upon LP/AP/HP switch position
• Crossover Controls: High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth ; Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth ; All-Pass: Yes
• Remote Controls: Optional Punch Level Control (PLC2) Ready
• Visual Indicators: Power/Protect/Thermal LED ; Input Clip LED3 ; Output Clip LED1,2,3 ; LED Color Legend: 1BLUE: <0.5% THD ; 2VIOLET: 1% THD ; 3RED: 10%+ THD
• Power Wire Gauge: 8 AWG to 4 AWG
• Power Input Connector: Captive C-Clamp
• Speaker Wire Gauge: 8 AWG to 18 AWG
• Speaker Output Connector: Captive C-Clamp
• Cooling: Convection
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 60 A
• Average Current Draw (13.8V Music): 28 A
• Max. Current Draw (13.8V Sinewave): 55 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 2.38 x 7.76 x 11.03 (in) ; 6.05 x 19.71 x 28.02 (cm)
• Shipping Weight: 10.5 Lbs. (4.76 Kg.)

Overview:

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd