ORIGINAL ROCKFORD FOSGATE PRIME USA R300X4 300W RMS 4 CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PRIME USA R300X4 300W RMS 4 CHANNEL AMPLIFIER

The PRIME R300X4 is a versatile 4-channel amplifier capable of running your entire system. The R300X4 is great for full-range or component speakers on the front channels with subwoofers on the rear running in bridged/mono mode.

Rockford Fosgate amplification at an unbelievable value. The R300X4 4-channel amplifier is so versatile, it will be the only amplifier your system needs. Full-range or component speakers on the front channels and a single R1S410 10" or R1S412 12" woofer bridged/mono on the rear. Consider your system clean, loud and done!. Check out our RFTECH:Woofer WiringWizard to get the most out of your amplifier.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• CE Compliant- This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
• Class A/B - An amplifier topology with the best of both worlds; a Class A preamp and Class B output stage.

Specifications:

• CEA-2006 Compliant: CEA-2006 Power Rating ; 50W x 4 @ 4Ω ; ≤1.0% THD+N
• Number of Channels: 4
• Total Power (Sum of Rated Power): 300 Watts RMS
• Rated Power (RMS Continuous Power): 50 Watts x 4 @ 4-Ohm ; 75 Watts x 4 @ 2-Ohm ; 150 Watts x 2 @ 4-Ohm Bridged
• Dynamic Power (PVC/PowerCube®): 76 Watts x 4 @ 4-Ohms 0° Res ; 100 Watts x 4 @ 2-Ohms 0° Res
• Bridgeable: Yes
• Frequency Response: 20Hz to 20kHz +/-1dB
• Input Sensitivity: 150 mV - 4 V
• Circuit Topology Class: Class A/B
• Efficiency (average): 69% @ 4-Ohm
• Total Harmonic Distortion (THD+Noise): 4-Ohm: <1.0% ; 2-Ohm: <1.0%
• Signal Input: High Level: 4-pin MOLEX ; Low Level: 2 RCA pair
• Signal Output: -
• Tone Controls: Front Channels (Punch Bass: 0dB/+6dB/+12dB @ 45Hz) ; Rear Channels (Punch Bass: 0dB/+6dB/+12dB @ 45Hz) ; Function works when crossover in (LP) position
• Crossover Controls: Front Channels (High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth) ; Rear Channels (High-Pass/Low-Pass (HP/LP): 50-250Hz @ 12dB/octave Butterworth)
• Remote Controls: -
• Visual Indicators: Power/Protect LED
• Power Wire Gauge: 4 AWG
• Power Input Connector: Screw terminal
• Speaker Wire Gauge: 8 AWG
• Speaker Output Connector: Screw terminal
• Cooling: Convection
• Heatsink: -
• Operating Voltage: 9 - 16 VDC
• Recommended Fuse (not included): 50 A
• Average Current Draw (13.8V Music): 25 A
• Max. Current Draw (13.8V Sinewave): 50 A
• Suggested Alternator: 75 A
• Dimensions (H x W x D): 1.98 x 6.77 x 13.19 (in) ; 5 x 17.2 x 33.5 (cm)
• Shipping Weight: 7.8 Lbs. (3.53 Kg.)

Overview:

• 12dB/octave Butterworth crossover
• 0/6/12 dB On Board Punch EQ Control
• 2/4 channel input switch
• High Level Input (4-pin)
• Separate Front and Rear Gain Control
• Real time output and power supply thermal sensing
• Cast aluminum heatsink
• 4 Gauge power/ground connectors
• MOSFET power supply
• Over current protection
• Short circuit protection
• Muted turn on
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd