ORIGINAL ROCKFORD FOSGATE PUNCH USA P1000X1D 1000W FULL RANGE CLASS-D 1-CHANNEL AMPLIFIER

ORIGINAL ROCKFORD FOSGATE PUNCH USA P1000X1D 1000W FULL RANGE CLASS-D 1-CHANNEL AMPLIFIER

The Punch P1000X1D is an efficient mono amplifier producing 1,000 Watts into a 1-Ohm or 2-Ohm load without excessive pull on the electrical system. The frequency response of the P1000X1D is optimized for mid-bass and subwoofers.

The P1000X1D 1,000 Watt full-range mono amplifier is versitle enough to run as a dual-mono system (one amplifier for front-left speakers and one amplifier for front-right speakers) or just for subwoofers. This amplifier has on-board Punch Bass to provide low frequency "boom" and features an infrasonic filter to keep damaging inaudible frequencies from damaging your subs.

Technologies:

• CEA-2006 Compliant - Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
• Full-Range Class D - A full-range version of the Class D topology which is a high efficiency amplifier design that reduces current consumption from the charging system.
• DSM - DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
• Class D - High efficiency amplifier design that reduces current consumption from the charging system.

Specifications:

• CEA-2006 Compliant:
• Number of Channels: 1
• Total Power (Sum of Rated Power): 1000 Watts RMS
• Rated Power (RMS Continuous Power): 500 Watts x 1 @ 4-Ohm ; 1000 Watts x 1 @ 2-Ohm ; 1000 Watts x 1 @ 1-Ohm
• Dynamic Power (PVC/PowerCube®): 574 Watts x 1 @ 4-Ohms ; 1099 Watts x 1 @ 2-Ohms
• Bridgeable: No
• Frequency Response: 10Hz - 500Hz +/-3dB
• Input Sensitivity:
• Circuit Topology Class: Class D
• Efficiency (average): 90% @ 4-Ohm ; 90% @ 2-Ohm
• Total Harmonic Distortion (Thd+Noise):
• Signal Input: Input Switch: Hi/Low level input ; Low Level: 1 RCA Pair
• Signal Output: Low Level: 1 RCA Pair
• Tone Controls: 0dB to +18dB @ 45Hz ; 0°/180° Variable Phase
• Crossover Controls: Low Pass: 50Hz - 500Hz @ 24dB/Octave
• Infrasonic: 25Hz @ 24dB/Octave
• Remote Controls: Optional PEQ Remote Punch EQ (overrides built-in Punch EQ2)
• Visual Indicators: Power ; Thermal ; Protect
• Power Wire Gauge: 4 AWG
• Power Input Connector: Block
• Speaker Wire Gauge: 12 AWG
• Speaker Output Connector: Block
• CoolingConvection:
• Heatsink:
• Operating Voltage:
• Recommended Fuse (Not Included):
• Average Current Draw (13.8V Music):
• Max. Current Draw (13.8V Sinewave):
• Suggested Alternator:
• Dimensions (H x W x D): 2.2 x 8.1 x 10.7 (in) ; 5.6 x 22.6 x 27.2 (cm)
• Shipping Weight9.2 Lbs. ; (4.17 Kg.)

Overview:

• Top mounted controls
• 0°/180° Phase Switch
• 24dB/octave crossover
• 4 Gauge power/ground connectors
• Cast aluminum heatsink
• Infrasonic filter
• MOSFET output stage
• MOSFET power supply
• RCA pass-thru outputs
• Top Mounted LED Indicators
• 1 Year Local Warranty By AutoCraft Electronics (M) Sdn Bhd